Industrial Pipe Cutting Machine — MC350NC Seriess
- Cut 130mm steel pipe in 7 seconds — 5.5KW motor, no stalling
- NC hydraulic auto-feed — program length and quantity, then walk away
- ±0.1mm repeatable accuracy on solid bar and thick-wall tube
- PLC batch control — set it once, the machine runs the whole order
MC350NC Industrial Cutting Machine Specifications
Understand our product specifications and compare them with your actual application to make an informed choice.
| Specification | What It Means for You |
|---|---|
| Φ125–130mm round, 110×110mm square at 90° | Cut exhaust pipes, structural tubes, and solid bar in one pass |
| 5.5KW dual-speed motor (4.5/5.5KW) | Low speed for stainless steel, high speed for carbon — no blade burn |
| NC hydraulic feed + hydraulic clamp | Program once, machine feeds and clamps itself. Operator handles loading only |
| 90° straight cut + ±45° miter | One industrial pipe cutting machine for straight and angled joints |
MC350NC Industrial Tube Cutting Machine – Product Description
The MC350NC industrial pipe cutter fills the gap between semi-automatic cold saws and fully CNC production lines. As a semi-automatic pipe cutter with CNC hydraulic control, it achieves automatic feeding, clamping, and PLC batch programming without the high cost of CNC machine tools.
A 5.5kW dual-speed motor drives high-speed steel blades through a rigid cast iron bed, cutting solid bars and thick-walled stainless steel without jamming or vibration. Unlike the MC315’s pneumatic feeding, which still requires operator intervention, this industrial pipe cutter automatically repeats preset programs without human intervention—the operator only needs to load workpieces and stack finished products.
For automotive exhaust system manufacturers, structural steel processing plants, and fitness equipment manufacturers, the MC350NC can transform a single-person cutting station into a single-person production line for cutting carbon steel, stainless steel, and solid bars with a maximum diameter of 130mm.
MC350NC CNC Tube Cutting Machine Feature Box
Auto-Lube Guide Rails — Self-oiling linear slideways. Zero daily greasing. Smooth, consistent feed motion extends both rail and blade life across thousands of cycles.
Hydraulic Clamping System — Constant clamping force regardless of tube shape or wall thickness. No manual tightening, no material slippage mid-cut, no wasted tubes.
PLC Batch Control — Set cut length and part count on the digital panel. This PLC pipe cutting machine feeds, clamps, and cuts automatically. Stops when the batch is done. Your operator loads material and handles finished pieces.
Dual-Speed Motor (4.5/5.5KW) — Switch between speed ranges for different materials. Low speed delivers high torque for stainless and solid bar. High speed rips through carbon steel and aluminum tubing.
Cut 130mm Pipe in 7 Seconds — 400+ Per Shift
Your MC315 is maxing out. Thick-wall orders are coming in, and your operator can’t keep up.
Here’s what the math looks like with an MC350NC industrial pipe cutting machine: 7 seconds per cut cycle on mild steel tube. That’s roughly 500 cuts per hour of machine time. Account for loading and unloading — a single operator comfortably hits 400+ finished cuts per shift, every shift. No fatigue drift. No eyeballing measurements.
The 5.5KW motor is the difference. Where the MC315’s 3KW motor bogs down on solid 50mm bar, the MC350NC powers through. Feed rate stays constant. Blade temperature stays stable. Your cut schedule doesn’t slip because the machine can’t handle the material.
Feed 30% Faster with NC Hydraulic Control
Manual feed means your operator pushes the saw head into the material. Some push too hard — blade wears fast. Some push too soft — cycle time creeps up. Either way, you lose money.
The MC350NC industrial pipe cutting machine eliminates this variable with NC hydraulic feed. The PLC controls hydraulic pressure into the cut. Same feed rate on cut #1 as on cut #400. The result: 30% faster average cycle time compared to manual-feed machines, plus predictable blade life.
This is what makes the MC350NC an NC pipe cutting machine worth the step up from pneumatics: consistent, programmable feed that doesn’t depend on who’s running the shift. As an NC hydraulic pipe cutting machine, it sits in a sweet spot — automated enough to run batches unattended, simple enough that any operator can program it in five minutes.
Pass Every Factory Audit with ±0.1mm Accuracy
Export customers send inspectors. They bring calipers. They measure tube ends. If five pieces in a batch vary by 0.5mm, you fail the audit.
The MC350NC industrial pipe cutting machine weighs 700kg. That’s not a spec — it’s an accuracy guarantee. The cast-iron bed absorbs vibration that lighter machines transmit into the cut. Combined with linear guide rails and hydraulic clamping that locks material in place, you get ±0.1mm repeatable accuracy on every piece in a batch.
For an industrial pipe cutter at this price point, that kind of consistency typically requires a full CNC setup. The MC350NC delivers it with NC hydraulics and mechanical rigidity.
Applications — MC350NC Industrial Tube Cutting Machine
From exhaust systems to structural steel and fitness frames, the MC350NC helps you achieve faster production, cleaner cuts, and more consistent results.
Automotive Exhaust Manufacturing
Exhaust production requires clean, burr-free tube ends for welding.
The MC350NC uses a cold saw blade to produce smooth cuts directly from the machine, reducing grinding work. With ±45° miter cutting, you can handle both straight cuts and angled joints in one setup.
Structural Steel & Construction
For heavy steel tubes and square sections, cutting stability is critical.
The MC350NC hydraulic clamp keeps the material firmly fixed during cutting, preventing movement and ensuring accurate results. It is suitable for structural frames, handrails, trusses, and other heavy-duty applications.
Fitness Equipment Production
Fitness frames require high repeatability for batch production.
The MC350NC’s automatic control allows you to program cutting lengths and produce multiple identical parts with consistent accuracy, reducing manual work and improving assembly efficiency.
Get Your Custom Machine Quotation Now
The MC350NC industrial pipe cutting machine ships factory-direct in 15-20 days. CE and ISO 9001 documentation included. No distributor takes a cut — you pay our factory price.
What is the maximum pipe diameter MC350NC can cut?
The MC350NC cuts round tubes up to 130mm and square tubes up to 110×110mm at 90°.
For 45° miter cuts, capacity is slightly reduced. If you regularly cut larger pipes, consider a bigger model.
How does the NC hydraulic feed improve efficiency?
The NC hydraulic feed controls cutting length and feed pressure automatically.
You only need to set the program, load the material, and the machine handles feeding, clamping, and cutting. This reduces operator workload and improves production consistency.
Can MC350NC cut solid steel bars?
Yes.The strong 5.5KW motor, hydraulic feed, and heavy machine structure allow MC350NC to cut solid steel bars with stable performance.
What cutting accuracy can you expect?
The MC350NC provides around ±0.1mm repeat accuracy with hydraulic clamping and rigid machine construction.It is suitable for production where consistent length and repeatability are required.
MC350NC vs full CNC machine — which should you choose?
Choose MC350NC if you:
- Produce around 300–500 pieces/day
- Have an operator for loading material
- Want better automation without a high CNC investment
Choose a full CNC system if you:
- Need unattended production
- Produce 1,000+ pieces/day
- Require automatic loading and multiple size changes